Open to PhD opportunities — Fall 2028 intake

Memory that
thinks in place.

I’m Taiqi Liu, a master’s researcher working on ferroelectric memory devices — HfO2-based HZO, FeFETs, and ferroelectric tunnel junctions — and how they can become reliable, low-power building blocks for computing-in-memory.

Focus HZO · FeFET · FTJ · FeRAM M.S. expected 2028 Based in China
32 µC/cm²Remanent polarization achieved in optimized HZO capacitors
10⁹ cyclesEndurance target for antiferroelectric HZO test structures
3 devicesFeFET, FTJ & MFM capacitors fabricated and characterized in-house

01 — About

A device physicist at heart, an IC researcher by training.

Short version: I make tiny capacitors remember — and then I try to make them remember reliably, for a very long time, at very low voltage.

My work sits at the intersection of materials, devices, and circuits. On the materials side, I study hafnia-based ferroelectrics — especially Zr-doped HfO2 (HZO) in both its ferroelectric and antiferroelectric phases. On the device side, I fabricate and measure MFM capacitors, ferroelectric tunnel junctions (FTJs), and ferroelectric FETs (FeFETs). On the systems side, I care about what those devices actually enable: dense non-volatile memory and computing-in-memory for edge AI.

I’m currently finishing my master’s (expected 2028) and preparing applications for Fall 2028 PhD programs in integrated circuits and electronic devices. I’m broadly interested in any IC direction where device physics still matters — emerging memory, heterogeneous integration, and hardware for AI — not just ferroelectrics.

What I’m looking for in a PhD lab

A group where I can go from film growth to array-level demonstration — and where reliability is treated as a first-class research question, not an afterthought.

  • Fabrication access + serious electrical characterization
  • Device–circuit co-design, not devices in isolation
  • Open, collaborative culture with strong mentorship

02 — Research

Research focus

Tap any line to expand it. These are the four threads that run through almost everything I do.

R.01

HZO ferroelectrics — wake-up, fatigue & the orthorhombic phase

Why does HZO need to “wake up,” why does it get tired, and how do we stabilize the ferroelectric phase without either?

I study ALD-grown HZO thickness and Zr-ratio series (7–12 nm), annealing conditions, and electrode effects. Using PUND, P–V hysteresis, and endurance cycling, I map how remanent polarization, coercive field, and leakage evolve — and test La/Y doping and interface layers as routes to wake-up-free operation.
HZOALDPUNDEndurance
R.02

FeFETs for embedded non-volatile memory

Memory windows are easy to report and hard to keep. I work on keeping them.

My FeFET work focuses on the memory window vs. reliability trade-off: charge trapping at the ferroelectric/interlayer interface, retention at temperature, and disturb in small arrays. Recent devices show a ~1.8 V window with 10-year extrapolated retention at 85 °C in simulation-backed measurements — the next step is statistical data across a full wafer.
FeFETRetentionCharge trapping
R.03

Antiferroelectric HZO & FTJs for analog computing

Double hysteresis loops look like a problem — until you need an analog, energy-efficient synapse.

Antiferroelectric HZO offers near-zero remanence, fast switching, and high endurance — attractive for capacitors in DRAM-like and energy-storage roles. In FTJs, I explore multi-level conductance states for vector–matrix multiplication, measuring linearity, symmetry, and cycle-to-cycle variation for neuromorphic inference.
AntiferroelectricFTJNeuromorphicCIM
R.04

Reliability physics — from defects to lifetime models

Breakdown, imprint, and fatigue are not footnotes. They decide whether a device ever leaves the lab.

I’m building a small reliability workflow: TDDB and bipolar stress testing, temperature-accelerated retention, and simple physics-based lifetime models that connect defect generation in HZO to circuit-level failure rates. This thread will take me to Lingshui in January 2027 for the REACT workshop on advanced IC reliability, including its ferroelectric memory reliability panel.
TDDBImprintLifetime modeling
Scientific illustration of a silicon wafer with HZO crystal lattice and a FeFET cross-section below it
Figure — From lattice to transistor

Top: HZO crystal lattice over a wafer. Bottom: the FeFET stack I work with — gate, ferroelectric HZO, interlayer, and silicon channel. Illustration, not measured data.

HZO · 10 nm · TiN / Si

03 — Writing

Selected publications & manuscripts

A compact list. Filter by type — full texts and data are available on request while several items are still under review.

Wake-Up-Free Hafnia-Based Ferroelectric Capacitors via Lanthanum Doping and Interface Engineering

IEEE Trans. Electron Devices · 2026

T. Liu, et al.

La-doped HZO capacitors with an engineered TiN interface achieve wake-up-free switching with 2Pr ≈ 64 µC/cm² and endurance beyond 10⁸ cycles at 3 MV/cm.

Retention–Disturb Trade-Off in HZO FeFETs: A Statistical Study Across 128 Devices

IEEE EDTM · 2026

T. Liu, et al.

Wafer-scale statistics linking interlayer thickness to memory window, retention, and read disturb — with a compact model that predicts array-level yield.

Antiferroelectric HZO for High-Endurance Energy Storage and Analog Synapses

arXiv · In preparation, 2026

T. Liu, et al.

Double-loop HZO capacitors cycled to 10⁹ with <10% degradation, plus FTJ conductance states evaluated for analog in-memory inference accuracy.

Temperature-Accelerated Reliability Assessment of Ferroelectric Tunnel Junctions

Under review · 2026

T. Liu, et al.

Arrhenius analysis of FTJ retention and breakdown from 25–150 °C, proposing a screening protocol for early-life failures in CIM arrays.


04 — Projects

Things I’ve built in the lab

Not just papers — the tools and test structures that made the papers possible.

Test Platform

Automated FeFET Characterization Bench

A Python-driven probe-station workflow for PUND, endurance, and retention testing. Runs overnight cycling jobs, logs every failure, and plots publication-ready figures automatically.

Python · SCPI · B1500A2025 — Now
Devices

HZO Thickness & Doping Matrix

A systematic wafer series — 3 thicknesses × 4 Zr ratios × 3 dopants — designed to answer one question cleanly: what actually stabilizes the orthorhombic phase in our process?

ALD · XRD · TEM2025 — 2026
Modeling

CIM Array Simulator for FTJ Synapses

A lightweight simulator that takes measured FTJ conductance variation and predicts MNIST inference accuracy at array scale — so device targets come from system needs, not guesswork.

PyTorch · Verilog-A2026
05 — News

Latest updates

  • Personal site launched at taiqiliu.noxc.ukThis page — a home for papers, projects, and PhD applications.
  • Attending REACT 2027 in Lingshui, HainanAdvanced IC Reliability workshop, including the Ferroelectric Memory Reliability panel on Jan 17.
  • Student poster abstract in preparationHZO reliability work being prepared for the REACT student poster session (abstract deadline Dec 31, 2026).
  • PhD outreach begins H1 2027Contacting prospective supervisors for Fall 2028 entry, with a focus on emerging memory and IC devices.
06 — Path

Education & timeline

  • M.S., Integrated Circuit Science & Engineering

    Thesis on reliability of HZO ferroelectric memory devices. Advanced Memory Devices Lab.

  • B.Eng., Microelectronics Science & Engineering

    Focus on semiconductor device physics and analog IC design. Senior project: CMOS-compatible ferroelectric capacitor process.

  • PhD, Electrical Engineering / Integrated Circuits

    Targeting fully-funded programs in Hong Kong, Singapore, Europe, and the US.


07 — Toolbox

Skills & methods

The practical stack behind the research above.

Fabrication

  • ALD (HZO, Al₂O₃, TiN)
  • Sputtering & RTA
  • Photolithography & etching
  • Cleanroom process integration

Characterization

  • P–V, PUND, C–V, I–V
  • Endurance, retention, TDDB
  • XRD, TEM, AFM, XPS (with collaborators)
  • Keysight B1500A / WGFMU

Computation

  • Python (NumPy, PyTorch, automation)
  • TCAD (Sentaurus) basics
  • Verilog-A compact modeling
  • MATLAB, Origin, LaTeX

Languages: English (fluent, academic writing & presentation) · Mandarin Chinese (native). Outside the lab: distance running, mechanical keyboards, and keeping far too many browser tabs of arXiv papers open.

Let’s talk memory, devices, or PhD labs.

I’m especially happy to hear from prospective PhD supervisors, collaborators working on ferroelectric reliability, and anyone building CIM hardware who needs device data that’s honest about variation and failure.

Website
taiqiliu.noxc.uk
Location
China · Open to HK / SG / EU / US for PhD
Availability
PhD starting Fall 2028 · RA inquiries welcome